EXTRA 15% OFF Hundreds of Clearance Items. Use Coupon Code: EASTER15
  • We are sorry, this item is not currently available. Please continue shopping.

Brians Sub Zero Goalie Blocker

2012 | 7969-41
  • bvseo_sdk, net_sdk,
  • getAggregateRating, method:CLOUD, 94ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

100% Satisfaction Guarantee

We stand behind everything we sell

low price guarantee

We'll price match from any competitor!

Unlimited Returns

Return any unused item anytime

Brian's has re-invented goalie equipment with it's new Sub Zero line, and the new Sub Zero Blocker is no exception.  This blocker has many innovative features that will undoubtedly help improve your game.

For starters, the blocker board is constructed using a rigid HD foams, and the perimeter of the face features bindingless board construction.  This gives the blocker a nice, clean look, and it also allows for the inside edge of the blocker to be attached to an integrated "cheater" side deflection plate.  By taking a closer look at the blocker face, you'll notice that Brians has decreased the width of the board to 7.5 inches, while increasing the width of the side deflector at the attachment point to the board by nearly 1/2 inch.  By decreasing the blocker board width, weight savings is realized without affecting the width or performance of the board.

The side deflector is also made of rigid, dual density HD foams, and behind the deflector sits an additional air pillow comfort pad that is removable if you don't like it.  The stick insertion point of the side deflector has been cut back more deeply so that it does not restrict stick grip.  Fingers are protected by HD foam wrap around protection, with softer LD foam backing. 

The palm of the Sub Zero blocker is made of Nash with airknit mesh finger gussets, and it also features a new "SBA" material on the palm and thumb.  This new SBA material is unique in the fact that it gets tackier as it gets wet, meaning that your stick grip will not deteriorate as your hand sweats throughout the game.  The hand is positioned approximately 1/2 inch forward of center (towards the nose of the blocker) for better paddle down play.  A think sponge pillow can be found on the back of the hand for added shock absorption.  The cuff of the glove is large and flexible, and an adjustable velcro wrist strap helps customize your fit.

  • Rigid, ultra-lightweight high density blocking board
  • Bindingless face maximizes blocking surface
  • Flared top eliminates skip-over
  • Thick sponge pillow absorbs shock on back of hand
  • Air pillow in sidewall for shock absorbtion
  • High density wrap around finger protection
  • Extended finger tip pads
  • New SBA Material with improved grip when wet
  • Beveled nose for paddle down play
  • Adjustable velcro wrist strap
  • Custom colors available
  • Custom graphics available



  • Cheater side deflector legally increases blocker width
  • Thick sponge pillow absorbs shock on back of hand
  • Large sidewall with dual density HD foams
Bauer End of Season Sale! 25% Savings on 50+ Bauer Items!

Measure your hand from the heel of the palm to the tip of the middle finger, then consult the chart below to find the size that will work for you.

Blocker Sizing Chart
4 3/4 - 5 5/8 in. 5 5/8 - 6 1/4 in. 6 1/4 - 7 in. 7 - 8 3/8 in.
119 - 143 cm 144 - 160 cm 161 - 178 cm 179 - 213 cm

 Key to a Proper Fit:

The blocker should be fitted based on hand size. The goalie's fingers should be no more than 1/4" from the end of the fingers in the palm. If the fingers are too long, chances are the hand tabs that tie down the palm to the blocker are too large. This will cause the blocker to wobble, tilt or rotate on the goaltender's hand, seriously affecting control while limiting coverage (blocking surface).

Weight:1.85 lbsWeight of the product measured in pounds.
External Material:Synthetic Leather & WeaveType of external material.
Palm Material:Nash Palm w/ Spring Mesh Fingers & GussetsThe type of materials that make up the palm and finger gussets of the blocker.
Side Block Protection:YesSide hand protection.
Made In:CanadaCountry of origin.
Warranty:1 Year LimitedPeriod of time the product is covered under a manufacturer's warranty.
  • bvseo_sdk, net_sdk,
  • getReviews, method:CLOUD, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • bvseo_sdk, net_sdk,
  • getContent, method:CLOUD, 110ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;